Alcatel-Lucent 7450 ESS-12 - Page 117

Page 136 7450 ESS OS Basic System Configuration Guide
At time t = 30 sec (Mode: Absolute)
-------------------------------------------------------------------------------
LSP Name : sample
Sender : 1.1.1.1
-------------------------------------------------------------------------------
Collect Stats : Enabled Accting Plcy. : None
Adm State : Up PSB Match : True
FC BE
InProf Pkts : 627 OutProf Pkts : 0
InProf Octets : 638286 OutProf Octets: 0
FC L2
InProf Pkts : 0 OutProf Pkts : 627
InProf Octets : 0 OutProf Octets: 638286
FC AF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC L1
InProf Pkts : 1254 OutProf Pkts : 0
InProf Octets : 1276572 OutProf Octets: 0
FC H2
InProf Pkts : 0 OutProf Pkts : 627
InProf Octets : 0 OutProf Octets: 638286
FC EF
InProf Pkts : 627 OutProf Pkts : 0
InProf Octets : 638286 OutProf Octets: 0
FC H1
InProf Pkts : 627 OutProf Pkts : 0
InProf Octets : 638286 OutProf Octets: 0
FC NC
InProf Pkts : 0 OutProf Pkts : 627
InProf Octets : 0 OutProf Octets: 638286
===============================================================================
B:Dut-C-cpm2#
ospf
Syntax ospf [ospf-instance]
Context monitor>router>ospf
Description This command enables the context to configure monitor commands for the OSPF instance.
Parameters ospf-instance — Specifies the OSPF instance.
Values 1 — 31
interface
Syntax interface interface [interface...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>router>ospf
Description This command displays statistics for OSPF interfaces at the configured interval until the configured count is
reached.