Field Replaceable Units
Page 130 7450 ESS-7
REMOVING AN SF/CPM
To remove a SF/CPM:
Step 1 If applicable, eject all compact flash cards from their slots. The compact flash LEDs
displayed on the SF/CPM must be either unlit or blinking amber before ejecting the flash
card.
Step 2 Disconnect all cable connections to the SF/CPM.
Step 3 Loosen the captive screws that fasten the SF/CPM to the chassis.
Step 4 Simultaneously, rotate the ejector levers inward to unlock the panel.
Step 5 Pull the card out of the slot. Place on an anti-static surface or in an anti-static bag.
Figure 45: Removing an SF/CPM
To Next Page
Loading...
