System Specifications
Page 44 7450 ESS-7
The Equipment Rack
Follow the equipment rack manufacturer’s instructions for proper rack installation.
The chassis must be installed in a rack. It cannot operate from a tabletop or floor. It can be front or
center mounted in many types of racks, including the following:
• Standard 19-inch (48.26 cm) equipment rack
• Standard telco rack (four-post)
The equipment rack rail mounting holes must align with the mounting holes on the chassis
mounting brackets. The mounting brackets are factory installed for a front mount in a 19-inch
rack.
Required tools:
• #2 Phillips screwdriver
• Flathead screwdriver
• Anti-static bags, mats, and packaging
• ESD wrist strap
To Next Page
Loading...
