Alcatel-Lucent 7750 SR OS - Page 135

IP Router Configuration
7750 SR OS Router Configuration Guide Page 135
Echo Request : 0 Echo Reply : 0
Router Solicits : 0 Router Advertisements : 0
Neighbor Solicits : 20 Neighbor Advertisements : 21
-------------------------------------------------------------------------------
Sent
Total : 47 Errors : 0
Destination Unreachable : 0 Redirects : 0
Time Exceeded : 0 Pkt Too Big : 0
Echo Request : 0 Echo Reply : 0
Router Solicits : 0 Router Advertisements : 0
Neighbor Solicits : 27 Neighbor Advertisements : 20
===============================================================================
B:CORE2#
interface
Syntax interface [{[ip-address | ip-int-name] [detail]} | [summary] | [exclude-services]
interface family [detail]]
Context show>router
Description This command displays the router IP interface table sorted by interface index.
Parameters ip-address — Only displays the interface information associated with the specified IP address.
Values ipv4-address a.b.c.d (host bits must be 0)
ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
ip-int-name — Only displays the interface information associated with the specified IP interface name.
detail — Displays detailed IP interface information.
summary — Displays summary IP interface information for the router.
exclude-services — Displays IP interface information, excluding IP interfaces configured for customer
services. Only core network IP interfaces are displayed.
family — Displays the router IP interface family to display.
Values ipv4 — Displays only those peers that have the IPv4 family enabled.
ipv6 — Displays the peers that are IPv6-capable.
Output Standard IP Interface Output — The following table describes the standard output fields for an IP
interface.
Label Description
Interface-Name
The IP interface name.