Alcatel-Lucent 7750 SR OS - Page 165

IP Router Configuration
7750 SR OS Router Configuration Guide Page 165
ip
Syntax ip
Context debug>router
Description This command configures debugging for IP.
arp
Syntax arp
Context debug>router>ip
Description This command configures route table debugging.
icmp
Syntax [no] icmp
Context debug>router>ip
Description This command enables ICMP debugging.
icmp6
Syntax icmp6 [ip-int-name]
no icmp6
Context debug>router>ip
Description This command enables ICMP6 debugging.
interface
Syntax [no] interface [ip-int-name | ip-address | ipv6-address]
Context debug>router>ip
Description This command displays the router IP interface table sorted by interface index.
Parameters ip-address — Only displays the interface information associated with the specified IP address.
Values ipv4-address a.b.c.d (host bits must be 0)
ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)