Alcatel-Lucent 7750 SR OS - Page 303

Filter Policies
7750 SR OS Router Configuration Guide Page 303
filter-sample
Specifies that traffic matching the associated IP filter entry is sampled if
the IP interface is set to cflowd ip-filter mode.
368
interface-disable-
sample
Specifies that traffic matching the associated IP filter entry is not sampled
if the IP interface is set to cflowd ip-filter mode.
369
Configure IP filter entry matching criteria
config>filter>ip-filter>entry
match
Enables the context to configure match criteria for the filter entry. 369
dscp
Configures a DiffServ Code Point (DSCP) name to be used for IP filter
matching.
375
dst-ip
Configures a destination IP address range to be used for IP filter matching. 375
dst-port
Configures a destination TCP or UDP port number or port range for IP
filter matching.
376
fragment
Configures fragmented or non-fragmented IP packets as an IP filter
matching.
377
icmp-code
Configures matching on ICMP code field in the ICMP header of an IP
packet for IP filter matching.
377
icmp-type
Configures matching on ICMP type field in the ICMP header of an IP
packet for IP filter matching.
377
ip-option
Configures matching packets with a specific IP option or a range of IP
options in the first option of the IP header as for IP filter matching.
378
multiple-option
Configures matching packets that contain one or more than one option
fields in the IP header for IP filter matching.
379
option-present
Configures matching packets that contain the option field or have an
option field of zero in the IP header for IP filter matching.
379
src-ip
Configures a source IP address range to be used for IP filter matching. 379
src-port
Configures a source TCP or UDP port number or port range for IP filter
matching.
380
tcp-syn
Configures matching on the SYN bit being set or reset in the control bits
of the TCP header of an IP packet for IP filter matching.
381
tcp-ack
Configures matching on the ACK bit being set or reset in the control bits
of the TCP header of an IP packet for IP filter matching.
381
Table 18: CLI Commands to Configure Filter Policies Parameters (Continued)
Command Description Page