Alcatel-Lucent 7750 SR OS - Page 315

Filter Policies
7750 SR OS Router Configuration Guide Page 315
Filter Sampling
Within a filter entry, you can specify that traffic matching the associated IP filter entry is sampled.
if the IP interface is set to cflowd ip-filter mode. Enabling filter-sample enables the cflowd tool.
Use the following CLI syntax to enable filter sampling:
CLI Syntax: config>filter# ip-filter filter-id
entry entry-id time-range time-range-name
filter-sample
interface-disable-sample
The following displays the configuration command usage to enable filter sampling in an existing
filter configuration:
Example: config>filter# ip-filter 11
config>filter>ip-filter# entry 10
config>filter>ip-filter>entry# filter-sample
config>filter>ip-filter>entry# interface-disable-sample
config>filter>ip-filter>entry# exit
The following example displays the IP filter entry configuration.
A:ALA-7>config>filter>ip-filter# info
----------------------------------------------
description "filter-main"
scope exclusive
entry 10 create
description "no-91"
filter-sample
interface-disable-sample
match
exit
action forward redirect-policy redirect1
exit
----------------------------------------------
A:ALA-7>config>filter>ip-filter#