Alcatel-Lucent 7750 SR OS - Page 426

Clear Commands
Page 426 7750 SR OS Router Configuration Guide
log
Syntax log log-id
Context clear
Description Clears the contents of a memory or file based filter log.
This command has no effect on a syslog based filter log.
Parameters log-id — The filter log ID destination expressed as a decimal integer.
Values 101 — 199
mac
Syntax mac mac-filter-id [entry entry-id] [ingress | egress]
Context clear>filter
Clears the counters associated with the MAC filter policy.
By default, all counters associated with the filter policy entries are reset. The scope of which counters
are cleared can be narrowed using the command line parameters.
Default Clears all counters associated with the MAC filter policy entries
Parameters mac-filter-id — The MAC filter policy ID.
Values 1 — 65535
entry-id — Specifies that only the counters associated with the specified filter policy entry will be
cleared.
Values 1 — 65535
ingress — Specifies to only clear the ingress counters.
egress — Specifies to only clear the egress counters.