Interface Configuration
7750 SR OS Interface Configuration Guide Page 397
t392dce
Syntax t392dce seconds
no t392dce
Context config>port>sonet-sdh>path>frame-relay
config>port>tdm>ds1>channel-group>frame-relay
config>port>tdm>ds3>frame-relay
config>port>tdm>e1>channel-group>frame-relay
config>port>tdm>e3>frame-relay
Description This command sets the DCE keepalive timer for the Frame Relay Local Management Interface
(LMI).
This number specifies the period at which the DCE checks for keepalive responses from the DTE and
updates status depending on the DCE error threshold value.
The no form of this command returns the t392dce keepalive timer to the default value.
Default 15
Parameters seconds —
Specify the expected interval in seconds between status inquiries issued by the DTE
equipment.
Values 5 — 30
To Next Page
Loading...
