RADIUS Attributes Reference
7750 SR RADIUS Attributes Reference Guide Page 167
26-6527-176 Alc-DSL-Type Type of the DSL line (ADSL1, ADSL2, ADSL2PLUS, VDSL1, VDSL2,
SDSL, other) obtained via ANCP.
Attribute is included/excluded based on configure subscriber-mgmt
authentication-policy/radius-accounting-policy <name> include-radius-
attribute access-loop-options.
26-6527-184 Alc-Wlan-Ue-Creation-
Type
DSM Only. Indicates if the UE is either an ESM host (IOM) or DSM host
(ISA). Fixed to ISA in case of DSM.
26-6527-191 Alc-ToServer-Dhcp6-
Options
DSM Only. If IA-NA is active, the attribute contains the options sent by the
client in the last DHCPv6 transaction. Inclusion of this attribute is enabled via
configure aaa isa-radius-policy <policy-name> acct-include-attributes
dhcp6-options.
26-6527-194 Alc-IPv6-Acct-Input-
Packets
Aggregate of all ingress forwarded IPv6 packet counters for policers and
queues that have stat-mode v4-v6 enabled (for example: configure
subscriber-mgmt sla-profile <sla-profile-name> ingress qos <policy-id>
queue|policer <id> stat-mode v4-v6).
Included when IPv6 aggregated accounting attributes are configured.
(configure subscriber-mgmt radius-accounting-policy <name> include-
radius-attribute v6-aggregate-stats). There is no overflow attribute when
counter wraps around 2^32.
26-6527-195 Alc-IPv6-Acct-Input-
Octets
Aggregate of all ingress forwarded IPv6 octet counters for policers and queues
that have stat-mode v4-v6 enabled (for example: configure subscriber-mgmt
sla-profile <sla-profile-name> ingress qos <policy-id> queue|policer <id>
stat-mode v4-v6).
Included when IPv6 aggregated accounting attributes are configured.
(configure subscriber-mgmt radius-accounting-policy <name> include-
radius-attribute v6-aggregate-stats
).
[26-6527-196] Alc-IPv6-Acct-Input-Gigawords indicates how many times (if
greater than zero) this counter has wrapped around 2^32.
26-6527-196 Alc-IPv6-Acct-Input-
GigaWords
Indicates how many times (one or more) the [26-6527-195] Alc-IPv6-Acct-
Input-Octets counter has wrapped around 2^32 in the course of delivering this
service. The attribute is not sent when its value equals zero.
Included when IPv6 aggregated accounting attributes are configured.
(configure subscriber-mgmt radius-accounting-policy <name> include-
radius-attribute v6-aggregate-stats).
Table 52: Enhanced Subscriber Management Accounting (description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
