UDS-115
P8ETH Ethernet Access Switch Module
3-32
3EM23952AA
Issue 01, September 2009
INDICATORS, CONNECTORS, AND CONTROL
The P2E3DS3 DS3 PDH module has the following indicator and connectors.
See figure 115-1 for P2E3DS3 DS3 PDH module front panel indicator and
connectors.
FUNCTIONAL OVERVIEW
In the transmit direction, the P2E3DS3 receives DS3 signals from the customer
interfaces. Encapsulates the DS3 data flows into standard Ethernet packets,
(IWF). The Ethernet packets are sent to the cross-connections matrix for
connection to their provisioned destinations.
In the receive direction, the P2E3DS3 receives Ethernet packets from the
cross-connections matrix from their provisioned sources. Extracts the DS3 data
flows from standard Ethernet packets (IWF). The DS3 signals are sent to the
customer interfaces.
ITEM FUNCTION
STATUS (S) • Off - Card not equipped, not
provisioned, or not powered
• Green Blinking - Download,
Software Booting, or Flash Module
Realignment in Progress
• Green - In Service, Normal
Operation, and Properly
Provisioned
• Yellow - In Protect, Properly
Provisioned as EPS
• Red - Card Fail
• Red Blinking - Card Mismatch
LINE 1 • IN - DS3 Rx interconnect
• OUT - DS3 Tx interconnect
LINE 2 • IN - DS3 Rx interconnect
• OUT - DS3 Tx interconnect
Figure 115-1. P8ETH Module (MSS/P8ETH)
To Next Page
Loading...
