3EM23953AB
Issue 01, February 2010
Prepare Floor
1-3
Chart-2
Chart-2
Prepare Floor
PURPOSE
This chart details the standard procedure for rack installation floor preparation. The two types of
racks that can be installed are the standard rack and the seismic.
GENERAL
Equipment racks are designed for fixed-location installation. Standard and seismic rack assemblies
are available.
Alcatel-Lucent provides expert Installation Services for installations that have different
requirements from the recommended configuration as outlined in this manual. Contact the
Alcatel-Lucent Technical Support Center at 1-(888) 252-2832 for details.
PREREQUISITE
Complete Chart-1 Unpack and Inspect Equipment.
RECOMMENDED TOOLS
• Safety glasses
• Anchor setting tool (Redhead RT58 or equivalent)
• Chalk line with chalk
• Extension cord (50-foot)
• Felt marking pens
• Hammer, claw (24 to 40 ounces)
• Roll of cellophane tape
• Rotary impact drill and associated drill bits
• Steel tape measure (25-foot)
• Insulated trouble lamp (droplight—Duralamp, or equivalent)
• Vacuum cleaner, High Efficiency Particulate Arrester (HEPA)
To Next Page
Loading...
