Alcatel-Lucent Enterprise ALE-30h - Page 54

User Manual
8AL91432ENAAed01 54 /73
3.11 Customize the color and the style of programmable softkeys (ALE-30h in
IP mode)
You can customize the color and style of the softkeys of the perso page and the add-on modules by
inserting a prefix in front of the label of the softkey.
When you program a softkey, add the prefix to the name of the softkey to customize it.
The prefix depends on the software version and
are defined as follow:
• \C: color
The prefix is followed by a number
between 1 and 10 which defines the color.
• \B: bold.
The numbers for each color are as follows:
Use the color number 0 to go back to the default
color.
Use cases:
• SOS (Orange): \C2SOS.
• SOS (Red, bold): \C3\BSOS.
3.12 Modifying direct call keys
• Reach the 'Menu' page.
• Settings Keys
• Select the key to modify.
• Name: enter the name of the key.
•
• Number: enter the number to associate with the key.
•
• Go back to the Homepage.
3.13 Modify the name of a system programmed key
• Reach the 'Menu' page.
• Settings Keys
• Select the key to modify.
• Name: enter the name of the key.
•
• Go back to the Homepage.