Alcatel-Lucent Halo H3P - Page 48

Copyright @ALE 2020 All Rights Reserved
48
N<1 or N>15
ring00
Examples:
Alert-Info: test/Bellcore-dr1
Alert-Info: Bellcore-dr1
Alert-Info: Bellcore-dr1;x-line-id=1
When the Alter-Info header contains the keyword “ringtone-N/ringtone-RingN” or
“MyMolodyN/MyMelodyRingN”,the IP phone will play the corresponding local ring tone (RingN.wav),
or play the first local ring tone (Ring1.wav) in about 10 seconds if “N” is greater than 15 or less than
1.
Examples:
Alert-Info: ringtone-2
Alert-Info: ringtone-Ring2.wav
Alert-Info: ringtone-2;x-line-id=1
Alert-Info: MyMelody2
Alert-Info: MyMelodyRing2.wav
Alert-Info: MyMelody2;x-line-id=1
The following table identifies the corresponding local ring tone:
Value of N
Ring Tone
0
ring00
1
ring01
2
ring02
3
ring03
4
ring04
5
ring05
6
ring06
7
ring07
8
ring08
9
ring09
10
ring10
11
ring11
12
ring12
13
ring13
14
ring14
N<1 or N>15
ring00
When the Alert-Info header contains an info text, the IP phone will map the text with the Internal
Ringer Text preconfigured on the IP phone, and then play the ring tone associated with the Internal
Ringer Text (the ring tone can be configured by the parameter. If no internal ringer text maps, the
IP phone will play the preconfigured local ring tone in about 10 seconds.
Example:
Alert-Info: info=family; x-line-id=0