System Configuration and Monitoring
Left running head:
Chapter name (automatic)
126
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW SNMP
show snmp
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the SNMP running configuration.
PARAMETERS
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show snmp
!
! SNMP Configurations
!
snmp trap enable
snmp system contact support@alcatel-lucent.com name alu1
snmp agent rocommunity private
snmp trap 1.1.1.1 v1 test 10
snmp trap 1.1.1.11 v1 test1 11
snmp-server user user123 auth MD5 passpass1
snmp-server group testgroup user123 security-model v3
snmp-server view view123 .1.3.6.1 included
snmp-server access testgroup security-model v3 auth read read-
view write write-view
RELEASE HISTORY
Release 2.3: command was added.
To Next Page
Loading...
