Alcatel-Lucent OmniAccess 5740 - Show Lan Counters

show lan counters
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
191
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW LAN COUNTERS
show lan counters slot <slot-number>
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the statistics of the packets processed at the main switching
process for all the switchports.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show lan counters slot 0
****LAN STATISTICS ****
Output queue 0/0 (size/max), 0 drops; Input queue 0/0 (size/max), 0 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
72416 packets input, 9595569 bytes, 0 no buffer
Received 13106 broadcasts, 28630 multicasts
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
49311 packets output, 28454005 bytes, 0 underruns
0 broadcast, 0 multicast
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer copied, 0 interrupts, 0 failures
RELEASE HISTORY
Release 2.3.2: command was introduced.
Parameter Description
slot-number Specifies the slot number of the
interface.