Alcatel-Lucent OmniAccess 5740 - Show Eth-Cfm Cfm-Stack-Table

show eth-cfm cfm-stack-table
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
363
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW ETH-CFM CFM-STACK-TABLE
show eth-cfm stack-table [interface <name> level <0-7>
direction {Down|Up}]
DESCRIPTION
This is entered in the Super User Mode or Configuration Mode. This command
displays stack-table information.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show eth-cfm cfm-stack-table
---------------------------------------------------------
Dot1ag Stack Table Information
---------------------------------------------------------
Interface VLAN-id level Dir MdIndex MaIndex MepIndex MacAddress
GigabitEthernet 3/0 0 7 Down 100 100 10 00e0.b1c6.df2a
GigabitEthernet 3/0:1 10 0 Down 1 1 1 00e0.b1c6.df2a
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
name Name of the interface.
0-7 Domain level of the maintenance
domain.
Down|Up Specify the direction of the MEP.