set comm-list
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
449
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SET COMM-LIST
set comm-list {<1-99>| <100-199>} delete
DESCRIPTION
This command is entered in the Route-Map Configuration Mode. This command
removes communities from the community attribute of an inbound or outbound
update.
PARAMETERS
DEFAULT VALUE
No communities are removed.
EXAMPLE
ALU(config-route-map)# set comm-list 130 delete
SET DAMPENING
set dampening <1-45> <1-20000> <1-20000> <1-255>
DESCRIPTION
This command is entered in the Route-Map Configuration Mode. This command
sets BGP route dampening factors.
PARAMETERS
Parameter Description
1-99 Standard community list number.
100-199 Extended community list number.
Parameter Description
1-45 Time (in minutes) after which a penalty is decreased. Once
the route has been assigned a penalty, the penalty is
decreased by half after the half-life period. The process of
reducing the penalty happens every 5 seconds. The range
of the half-life period is 1 to 45 minutes.
The default is 15 minutes.
1-20000 If the penalty for a flapping route decreases enough to fall
below reuse limit, router starts advertising the route.
The default is 750 seconds.
To Next Page
Loading...
