Router Information Protocol
Left running head:
Chapter name (automatic)
490
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
V2-BROADCAST (RIP)
ip rip v2-broadcast
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to allow RIP Version 2 update packets to be sent as broadcast packets
instead of multicast packets.
PARAMETERS
None.
DEFAULT VALUE
This command is disabled by default.
EXAMPLE
ALU(config-if GigabitEthernet3/0)# ip rip v2-broadcast
To Next Page
Loading...
