Border Gateway Protocol
Left running head:
Chapter name (automatic)
540
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW IP BGP NEIGHBORS
show ip bgp neighbors {<ip-address> [advertised-routes
|dampened-routes|flap-statistics|paths [<regular-expression>]
|received-routes|routes]|vrf <vrf-name>}
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays information about the TCP and BGP neighbor connections.
PARAMETERS
EXAMPLE 1
ALU# show ip bgp neighbors
BGP neighbor is 1.1.1.2, remote AS 100, external link
BGP version 4, remote router id 3.3.3.3
BGP state = Established, up for 00:12:08
Last read 00:00:07, Last sent 00:00:07
Hold time is 180, keepalive interval is 60 seconds
Neighbor capabilities:
Route refresh: advertised and received
Address family IPv4 Unicast: advertised and received
Received 342 messages, 0 notifications, 0 in queue
Sent 333 messages, 7 notifications, 0 in queue
Minimum time between advertisement runs is 30 seconds
For Address Family IPv4 Unicast
Route refresh request: received 0, sent 0
Field Description
ip-address IP address of the neighbor. If you omit this argument, all
neighbors are displayed.
advertised-
routes
Displays all the routes the router has advertised to a BGP
neighbor.
dampened-routes Displays the dampened routes received from the neighbor.
flap-statistics Displays flap-statistics of the routes learnt from the
neighbor.
path <regular-
expression>
Regular expression that is used to match the paths
received.
If regular-expression is not specified, displays all the paths
received from the neighbor.
received-routes Displays all received routes (both accepted and rejected)
from the specified neighbor.
routes
Displays all routes that are received and accepted. This is a
subset of the output from the received-routes keyword.
vrf-name Name of the VRF.
To Next Page
Loading...
