Alcatel-Lucent OmniAccess 5740 - Ip Pim Rp-Candidate

ip pim rp-candidate
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
611
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP PIM RP-CANDIDATE
ip pim rp-candidate <interface-name> [group-list {<access-list-
name>|<1-99>}]
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure the PIM router as RP candidate. RP uses specified interface address.
BSR selects the RP with the highest priority.
If multiple routers are candidate RP for same group, then BSR calculates the hash
value, and with the highest hash value becomes RP.
If more than one RP has the same hash value, the RP with the highest IP address
is chosen.
Note: All routers in the PIM domain should have same RP address for a multicast group.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config)# ip pim rp-candidate GigabitEthernet3/0 group-list
30
Parameter Description
interface-name Name of the interface.
access-list-name Name of a specific access list.
1-99 Standard access-list number.