Alcatel-Lucent OmniAccess 5740 - Show Ip Nhrp Interface Tunnel

show ip nhrp interface Tunnel
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
825
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW IP NHRP INTERFACE TUNNEL
show ip nhrp interface Tunnel <interface-number>
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the NHRP configuration on an interface.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show ip nhrp interface Tunnel 0
172.23.1.1/32 via 172.23.1.1
Tunnel0 created, never expire
Type: static, Flags: up
NBMA address: 10.0.1.1
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
interface-number Tunnel interface number.