Generic Routing Encapsulation
Left running head:
Chapter name (automatic)
866
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
GRE-KEEP-ALIVE-INTERVAL
gre-keep-alive-interval <1-3600>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure the GRE keepalive interval (in seconds).
PARAMETERS
DEFAULT VALUE
The default keepalive interval is 10 seconds.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# gre-keep-alive-interval 100
RELEASE HISTORY
Release 2.3.2: command was introduced.
Parameter Description
1-3600 Specifies the interval (in seconds) at
which the GRE keep alive messages is to
be sent.
To Next Page
Loading...
