Alcatel-Lucent OmniAccess 5740 - Show Transparent-Forward Statistics

Transparent Firewall
Left running head:
Chapter name (automatic)
880
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW TRANSPARENT-FORWARD STATISTICS
show transparent-forward statistics [<tf-policy name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to display the statistics of all the TF policies configured in the
system.
If a policy-name is specified, then the statistics for the specified TF policy are
displayed. This displays the number of IP, 'other protocol' packets (excluding the
above) forwarded by TF, and number of packets dropped.
PARAMETERS
EXAMPLE
ALU(config)# show transparent-forward statistics
!
! Transparent-forward Statistics
!
interface GigabitEthernet3/1 :
IP 0, ARP 0, IPX 0, AppleTalk 0, Others 0,Dropped 0
interface GigabitEthernet3/0 : tf
IP 0, ARP 0, IPX 0, AppleTalk 0, Others 0,Dropped 0
ALU(config)#
Parameter Description
tf-policy name Displays the statistics for the specified
TF policy.