Alcatel-Lucent OmniAccess 5740 - Ip Dhcp Option Tftp-Server

ip dhcp option tftp-server
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
935
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP DHCP OPTION TFTP-SERVER
ip dhcp option tftp-server <string> [vrf <vrf-name>]
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure the IP address/domain name of the TFTP server.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# ip dhcp option tftp-server 3.2.2.1
RELEASE HISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
Parameter Description
string IP address/domain name of the TFTP
server.
vrf-name If the VRF name is specified in the
commands, it configures the DHCP
option for the specified VRF.
If the VRF is not specified, the option is
configured for the Default VRF.