page 2-4 OmniSwitch 6250 Series Hardware Users Guide September 2009
Preliminary
9/28/09
OmniSwitch 6250-8M Front Panel.
OS6250-8M Front Panel
Refer to “LED Status” on page 2-20 for LED status information.
Item Description
A
System Status LEDs
Provides status on hardware, software, stacking and power.
B
Console Port
RS-232 console port with an RJ-45 connector. Provides access to the CLI for
configuration and management.
C
10/100BaseT RJ-45 Ports
10/100BaseT non-combo ports. Odd-numbered ports are on top row, even-
numbered ports are on bottom row.
D
10/100/1000BaseT or 100/1000BaseX SFP Combo Ports
Two 10/100/1000BaseT or SFP combo ports for various supported SFP
transceivers.
E
SFP Uplink or SFP+ Stacking Ports
Two SFP or SFP+ ports to be used for uplink or stacking.
F
USB Port
High speed USB 2.0 port.
G
Push Button
When pushed all LEDs will turn off and the LED of the Stack ID will remain
lit.
A
B
C
D
E
F
G
To Next Page
Loading...
