LINK OAM Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 26-41
-> show efm-oam port 1/1 history log-type link-fault
Legend: Location: * - Remote, # - Local
LogID TimeStamp Event
Total
-----+---------+---------+------+-----------+
* 1 TUE JAN 06 19:46:51 2009 1
# 2 TUE JAN 06 19:46:51 2009 1
Output fields are described here:
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
dot3OamEventLogTable
dot3OamEventLogIndex
dot3OamEventLogTimestamp
dot3OamEventLogOui
dot3OamEventLogType
dot3OamEventLogLocation
dot3OamEventLogWindowHi
dot3OamEventLogWindowLo
dot3OamEventLogThresholdHi
dot3OamEventLogThresholdLo
dot3OamEventLogValue
dot3OamEventLogRunningTotal
dot3OamEventLogEventTotal
output definitions
LogID Specifies individual events within the event log.
Timestamp The value of actual time at the time of the logged event.
Log Type Specifies the type of event log.
Event Total Specifies the total number of times one or more of these occurrences
have resulted in an Event Notification.
show efm-oam port statistics Displays the LINK OAM statistics on a port, or a range of ports or
on all ports.
clear efm-oam log-history Clears the LINK OAM event logs history on a port.
To Next Page
Loading...
