UDLD Commands
page 27-2 OmniSwitch 6250 CLI Reference Guide November 2009
udld
Globally enables or disables UDLD protocol on the switch.
udld {enable | disable}
Syntax Definitions
enable Globally enables UDLD on the switch.
disable Globally disables UDLD on the switch.
Defaults
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
The port that was shutdown by this command can be reset by using the interfaces admin command.
Examples
-> udld enable
-> udld disable
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaUdldGlobalStatus
parameter default
enable | disable disable
udld port Enables or disables UDLD status on a specific port or a range of ports.
show udld configuration Displays the global status of UDLD configuration.
show udld configuration port Displays the configuration information for all UDLD ports or for a
particular UDLD port on the switch.
To Next Page
Loading...
