Alcatel-Lucent OmniSwitch 6250 - Show Udld Neighbor Port

UDLD Commands
page 27-18 OmniSwitch 6250 CLI Reference Guide November 2009
show udld neighbor port
Displays the UDLD neighbor ports.
show udld neighbor port slot/port
Syntax Definitions
slot/port The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
N/A
Examples
-> show udld neighbor port 1/42
Neighbor ID Device Id Port Id
-----------------+--------------------+----------------
1 00:d0:95:ea:b2:48 00:d0:95:ea:b2:78
2 00:d0:95:ea:b2:48 00:d0:95:ea:b2:79
3 00:d0:95:ea:b2:48 00:d0:95:ea:b2:74
4 00:d0:95:ea:b2:48 00:d0:95:ea:b2:75
5 00:d0:95:ea:b2:48 00:d0:95:ea:b2:76
6 00:d0:95:ea:b2:48 00:d0:95:ea:b2:77
Release History
Release 6.6.1; command was introduced.
output definitions
Neighbor ID The name of the neighbor.
Device ID The device ID.
Port ID The port ID.