UDLD Commands
page 27-20 OmniSwitch 6250 CLI Reference Guide November 2009
show udld status port
Displays the UDLD status for all ports or for a specific port.
show udld status port [slot/port]
Syntax Definitions
slot/port The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
Defaults
By default, a list of all UDLD ports is displayed.
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
N/A
Examples
-> show udld status port
Slot/Port Admin State Operational State
--------------+------------------+------------------------
1/1 disabled not applicable
1/2 disabled not applicable
1/3 disabled not applicable
1/21 disabled not applicable
1/40 disabled not applicable
1/41 disabled not applicable
1/42 enabled bidirectional
1/43 enabled bidirectional
1/44 enabled bidirectional
1/45 enabled bidirectional
1/46 enabled bidirectional
1/47 enabled bidirectional
1/48 enabled bidirectional
-> show udld status port 1/44
Admin State : enabled,
Operational State : bidirectional
output definitions
Slot/Port Slot number for the module and physical port number on that module.
Admin State Indicates whether UDLD is administratively enabled or disabled.
Operational State Indicates the state of interface determined by UDLD operation, which
can be notapplicable, shutdown, undetermined or bidirectional.
To Next Page
Loading...
