Alcatel-Lucent OmniSwitch 6250 - Port Mapping

Port Mapping Commands
page 28-4 OmniSwitch 6250 CLI Reference Guide November 2009
port mapping
Enables, disables, or deletes a port mapping session.
port mapping port_mapping_sessionid {enable | disable}
no port mapping port_mapping_sessionid
Syntax Definitions
port_mapping_sessionid The port mapping session ID. Valid range is 1 to 8.
enable Enables a port mapping session.
disable Disables a port mapping session.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
To be enabled, a session should have a minimum of two ports.
Examples
-> port mapping 3 enable
-> port mapping 4 disable
-> no port mapping 5
Release History
Release 6.6.1; command was introduced.
parameter default
enable | disable disable