IP Commands
page 29-22 OmniSwitch 6250 CLI Reference Guide November 2009
Examples
-> ip redist rip into static route-map rip-to-static1
-> ip redist rip into static route-map rip-to-static2
-> no ip redist rip into static route-map rip-to-static2
-> ip redist static into rip route-map static-to-rip
-> ip redist static into rip route-map static-to-rip disable
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaRouteMapRedistProtoTable
alaRouteMapRedistSrcProtoId
alaRouteMapRedistDestProtoId
alaRouteMapRedistRouteMapIndex
alaRouteMapRedistStatus
alaRouteMapRedistAddressType
alaRouteMapRedistRowStatus
show ip redist Displays the route map redistribution configuration.
ip route-map action Creates a route map for redistribution and sets the status of the route
map to permit or deny.
To Next Page
Loading...
