IP Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 29-57
Examples
-> arp filter 171.11.1.1
-> arp filter 172.0.0.0 mask 255.0.0.0
-> arp filter 198.0.0.0 mask 255.0.0.0 sender
-> arp filter 198.172.16.1 vlan 200 allow
-> no arp filter 171.11.1.1
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaIpArpFilterTable
alaIpArpFilterIpAddr
alaIpArpFilterIpMask
alaIpArpFilterVlan
alaIpArpFilterMode
alaIpArpFilterType
clear arp filter Clears all ARP filters from the filter database.
ip interface Enables or disables the Local Proxy ARP feature on an IP inter-
face. When enabled, all traffic within the VLAN is routed. ARP
requests return the MAC address of the IP router interface.
show arp filter Displays the ARP filter configuration.
To Next Page
Loading...
