IP Commands
page 29-58 OmniSwitch 6250 CLI Reference Guide November 2009
clear arp filter
Clears the ARP filter database of all entries.
clear arp-cache
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This commands clears all ARP filters configured on the switch. To remove an individual filter entry, use
the no form of the arp filter command.
Examples
-> clear arp filter
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaIpClearArpFilter
arp filter Configures an ARP filter to allow or block the processing of speci-
fied ARP Request packets.
show arp filter Displays the ARP filter configuration.
To Next Page
Loading...
