IP Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 29-85
Release History
Release 6.6.1; command was introduced.
Related Commands
output definitions
Dest Addr Destination IP address.
Subnet Mask Destination IP address IP subnet mask.
Gateway Addr IP address of the gateway from which this address was learned.
Age Age of the entry. If the entry is less than a day old, it is displayed in
hh/mm/ss format. If it is more than a day old, it is displayed in dd/hh
format (e.g., a route that is 2 days and 12 hours old is displayed as
2d12h).
Protocol Protocol by which this IP address was learned (e.g., RIP). NETMGT
indicates a static route. LOCAL indicates a local interface.
Route Count The number of routes that appear in the IP Foredoing table for each
protocol type listed.
ping Used to test whether an IP destination can be reached from the
local switch.
traceroute Used to find the path taken by an IP packet from the local switch to
a specified destination.
show ip route Displays a list of all routes (static and dynamic) that exist in the IP
router database.
To Next Page
Loading...
