IP Commands
page 29-92 OmniSwitch 6250 CLI Reference Guide November 2009
Related Commands
MIB Objects
alaRouteMapRedistProtoTable
alaRouteMapRedistRouteMapIndex
alaRouteMapTable
alaRouteMapIndex
alaRouteMapSequence
alaRouteMapType
alaRouteMapValue
alaRouteMapRowStatus
ip route-map action Creates a route map for redistribution and sets the status of route
map to permit or deny.
ip route-map match ip address Matches the route with the specified IPv4 address or with addresses
contained in an IPv4 access list specified by the access list name.
ip route-map match ipv6
address
Matches the route with the specified IPv6 address or with addresses
contained in an IPv6 access list specified by the access list name
ip route-map match ip-
nexthop
Matches the routes that have a next-hop router address permitted
by the specified access list.
ip route-map match ipv6-
nexthop
Matches the routes that have an IPv6 next-hop router address per-
mitted by the specified access list
ip route-map match tag Permits or denies a route based on the specified next-hop IP
address.
ip route-map match tag Matches the tag value specified in the route map with the one that
the routing protocol learned the route on.
ip route-map match metric Matches the metric value specified in the route map with the one
that the routing protocol learned the route on.
To Next Page
Loading...
