IP Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 29-95
show ip config
Displays IP configuration parameters.
show ip config
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show ip config
IP directed-broadcast = OFF,
IP default TTL = 64
Release History
Release 6.6.1; command was introduced.
Related Commands
output definitions
IP directed-broadcast Indicates whether the IP directed-broadcast feature is on or off.
IP default TTL IP default TTL interval.
ip directed-broadcast Enables or disables IP directed broadcasts routed through the
switch.
ip default-ttl Sets TTL value for IP packets.
To Next Page
Loading...
