EasyManua.ls Logo

Alcatel-Lucent OmniSwitch 6250 - Understanding Priority Disconnect; Setting Priority Disconnect Status

Alcatel-Lucent OmniSwitch 6250
2018 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chassis MAC Server (CMS) Commands
page 3-6 OmniSwitch 6250 CLI Reference Guide November 2009
mac release
Releases the MAC address currently being used as the primary base MAC address.
mac release
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
The MAC address is released only if the address has not been derived from the EEPROM (i.e., it should be
a retained MAC address of the old primary switch).
Examples
-> mac release
Release History
Release 6.2.1; command was introduced.
Release 6.3.1; mac-retention keyword was replaced with the mac keyword.
Related Commands
N/A
MIB Objects
chasMacAddrRetentionObjects
chasMacAddrRetentionStatus

Table of Contents

Other manuals for Alcatel-Lucent OmniSwitch 6250

Related product manuals