IPv6 Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 30-9
ipv6 hop-limit
Configures the value placed in the hop limit field in the header of all IPv6 packets that are originated by
the switch. It also configures the value placed in the hop limit field in router advertisements.
ipv6 hop-limit value
no ipv6 hop-limit
Syntax Definitions
value Hop limit value. The range is 0 - 255.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Use the no form of this command to return the hop limit to its default value.
• Inputting the value 0 (zero) will result in the default (64) hop-limit.
Examples
-> ipv6 hop-limit 64
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
ipv6MibObjects
Ipv6DefaultHopLimit
parameter default
value 64
show ipv6 information Displays IPv6 information.
To Next Page
Loading...
