Alcatel-Lucent OmniSwitch 6250 - Ipv6 Rip Route-Tag

IPv6 Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 30-71
ipv6 rip route-tag
Configures the route tag value for RIP routes generated by the switch.
ipv6 rip route-tag value
Syntax Definitions
value Route tag value. Valid range is 0 – 65535.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This value does not apply to routes learned from other routers. For these routes, the route tag propagates
with the route.
Examples
-> ipv6 rip route-tag 30
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaProtocolripng
alaRipngRouteTag
parameter default
value 0
show ipv6 rip Displays RIPng status and general configuration information.