DHCP Relay Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 32-7
ip helper standard
Sets DHCP Relay forwarding option to standard. All DHCP packets are processed by a global relay
service.
ip helper standard
Syntax Definitions
N/A
Defaults
By default, the DHCP Relay forwarding option is set to standard.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
To process DHCP packets on a per VLAN basis, use the ip helper per-vlan only command.
Examples
-> ip helper standard
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
iphelperStatTable
iphelperForwOption
show ip helper Displays current DHCP Relay configuration information.
show ip helper stats Displays DHCP Relay statistics, including the number of client packets
received and transmitted to the DHCP server and packets dropped due to
forward delay time and maximum hops violations.
To Next Page
Loading...
