Alcatel-Lucent OmniSwitch 6250 - Ip Helper Pxe-Support

DHCP Relay Commands
page 32-18 OmniSwitch 6250 CLI Reference Guide November 2009
ip helper pxe-support
Enables or disables relay agent support for Preboot Execution Environment (PXE) devices.
ip helper pxe-support {enable | disable}
Syntax Definitions
enable Enables PXE support.
disable Disables PXE support.
Defaults
By default, PXE support is disabled for the switch.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
PXE support was enabled by default in previous releases. Note that PXE is currently disabled by default
and is now a user-configurable option using the ip helper pxe-support command.
Examples
-> ip helper pxe-support enable
-> ip helper pxe-support disable
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
iphelperPXESupport
show ip helper Displays current DHCP Relay configuration information.