DHCP Relay Commands
page 32-64 OmniSwitch 6250 CLI Reference Guide November 2009
-> show ip udp relay destination 1776
Service Port VLANs
-----------------+--------+----------------
A UDP Protocol 1776 18
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
iphelperTable
iphelperService
iphelperVlan
iphelperxPropertiesTable
iphelperxPropertiesName
iphelperxPropertiesPort
output definitions
Service The active UDP service name.
Port The UDP service port number.
VLANs The VLAN assigned to the UDP service port that will forward traffic
destined for that port. Use the ip udp relay vlan command to configure
this value.
show ip udp relay service Displays current configuration for UDP services by service name or by
service port number.
show ip udp relay statistics Displays the current statistics for each UDP port relay service.
To Next Page
Loading...
