Power over Ethernet (PoE) Commands
page 4-14 OmniSwitch 6250 CLI Reference Guide November 2009
show lanpower
Displays current inline power status and related statistics for all PoE ports in a specified slot.
show lanpower slot
Syntax Definitions
slot The slot for which current inline power status and related statistics are to
be displayed.
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Enterprise Models
Usage Guidelines
N/A
Examples
-> show lanpower 1
Port Maximum(mW) Actual Used(mW) Status Priority On/Off Class
----+-----------+---------------+-----------+---------+------+-------
1 31000 0 Undefined Low OFF -
2 31000 0 Undefined Low OFF -
3 31000 0 Undefined Low OFF -
4 31000 0 Undefined Low OFF -
5 31000 0 Undefined Low OFF -
6 31000 0 Undefined Low OFF -
7 16000 0 Undefined Low OFF -
(Output truncated)
22 16000 0 Undefined Low OFF -
23 31000 0 Undefined Low OFF -
24 31000 0 Undefined Low OFF -
Slot 1 Max Watts 225
1 Power Supplies Available
output definitions
Port A PoE port for which current status and related statistics are being
displayed.
Maximum (mW) The current maximum amount of power allocated to the corresponding
PoE port, in milliwatts. The default value is 15400. To change this set-
ting, use the lanpower power command.
Actual Used (mW) The actual amount of power being used by an attached device (if appli-
cable), in milliwatts. If no device is attached to the corresponding port,
this row displays a value of 0.
To Next Page
Loading...
