Port Mirroring and Monitoring Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 34-5
port mirroring
Enables, disables, or deletes a port mirroring session.
port mirroring port_mirror_sessionid {enable | disable}
no port mirroring port_mirror_sessionid {enable | disable}
Syntax Definitions
port_mirror_sessionid Mirroring session identifier.
enable Enables port mirroring.
disable Disables port mirroring.
no Optional syntax. Deletes a previously-configured port mirroring session.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Use the no form of this command to delete a port mirroring session.
• You must first enter the port mirroring source destination command to specify the mirrored and
destination ports. Then use this command to enable or disable port mirroring activity on these ports.
Examples
-> port mirroring 6 enable
-> port mirroring 6 disable
-> no port mirroring 6
Release History
Release 6.6.1; command was introduced.
parameter default
enable | disable disable
To Next Page
Loading...
