Port Mirroring and Monitoring Commands
page 34-12 OmniSwitch 6250 CLI Reference Guide November 2009
show port monitoring status
Displays port monitoring status.
show port monitoring status [port_monitor_sessionid]
Syntax Definitions
port_monitor_sessionid Monitoring session identifier.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If a port monitoring session identifier is not specified with this command, then all port monitoring sessions
are displayed.
Examples
-> show port monitoring status
Session Monitor Monitor Overwrite Operating Admin
slot/port Direction Status Status
----------+----------+----------+--------------+----------+--------------------
1. 1/ 9 Bidirectional ON ON ON
Release History
Release 6.6.1; command was introduced.
output definitions
Session The port monitoring session identifier.
Monitor slot/port The location of the monitored port.
Monitor Direction The direction of the monitoring session, which can be bidirectional
(the default), inport, or outport.
Overwrite Whether files created by a port monitoring session can be overwritten.
The default is ON.
Operating Status The current operating status of the port monitoring session (on/off).
Admin Status The current administrative status of the port monitoring session (on/
off).
To Next Page
Loading...
