Health Monitoring Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 36-5
health statistics reset
Resets health statistics for the switch.
health statistics reset
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This command clears statistics for the entire switch. You cannot clear statistics for a module or port only.
Examples
-> health statistics reset
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
HealthThreshInfo
healthSamplingReset
show health Displays health statistics for the switch.
To Next Page
Loading...
