Health Monitoring Commands
page 36-10 OmniSwitch 6250 CLI Reference Guide November 2009
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
healthModuleTable
healthModuleSlot
healthModuleRxLatest
healthModuleRx1MinAvg
healthModuleRx1HrAvg
healthModuleRx1HrMax
healthModuleRxTxLatest
healthModuleRxTx1MinAvg
healthModuleRxTx1HrAvg
healthModuleRxTx1HrMax
healthModuleMemoryLatest
healthModuleMemory1MinAvg
healthModuleMemory1HrAvg
healthModuleMemory1HrMax
healthModuleCpuLatest
healthModuleCpu1MinAvg
healthModuleCpu1HrAvg
healthModuleCpu1HrMax
output definitions
Receive Traffic received by the switch.
Transmit/Receive Traffic transmitted and received by the switch.
Memory Switch memory.
CPU Switch CPU.
Temperature Cmm CMM Chassis Temperature.
Temperature Cmm Cpu CMM CPU Temperature.
Limit Currently configured device threshold levels (percentage of total avail-
able bandwidth or temperature measured in degrees Celsius).
Curr Current device bandwidth usage or temperature (measured in degrees
Celsius).
1 Min Avg Average device bandwidth usage or temperature (measured in degrees
Celsius) over a 1-minute period.
1 Hr Avg Average device bandwidth usage or temperature (measured in degrees
Celsius) over a 1-hour period.
1 Hr Max Maximum device bandwidth usage or temperature (measured in
degrees Celsius) over a 1-hour period (i.e., the maximum of the 1
minute averages).
health statistics reset Resets health statistics for the switch.
show health all Displays health statistics for a specified resource on all NIs cur-
rently operating in the chassis.
To Next Page
Loading...
