QoS Commands
OmniSwitch CLI Reference Guide November 2009 page 38-11
qos log lines
Configures the number of lines in the QoS log.
qos log lines lines
Syntax Definitions
lines The number of lines included in the QoS log. A value of zero turns off
logging to the console. The range is 0–512.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• To turn off logging, enter 0 for the number of log lines. (Note that error messages will still be logged.)
• If you change the number of log lines, you may clear all messages in the QoS log. To avoid clearing all
messages in the log, enter the qos log lines command in the boot.cfg file. The log length will be
changed at the next reboot.
Examples
-> qos log lines 5
-> qos log lines 0
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaQoSConfigTable
alaQoSConfigLogLines
parameter default
lines 256
show qos log Displays the log of QoS events.
To Next Page
Loading...
