QoS Commands
OmniSwitch CLI Reference Guide November 2009 page 38-25
egress Logs information about packets leaving the switch.
rsvp Logs information about RSVP flows. Currently not supported.
balance Logs information about flows that are part of a load balancing cluster.
Not supported for the OmniSwitch 6624/6648.
nimsg Logs information about QoS interfaces.
Defaults
By default basic information messages are logged (info). Error messages are always logged.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Use the no form of this command to change the type of messages that will be logged or to return
debugging to its default state.
• Use this command to troubleshoot QoS events on the switch.
Examples
-> debug qos flows queue
-> qos debug no flows no queue
-> debug no qos
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaQoSConfigTable
alaQoSConfigDebug
qos forward log Enables the switch to send events to the PolicyView application in real
time.
qos log lines Configures the number of lines in the QoS log.
show qos log Displays the log of QoS events.
To Next Page
Loading...
